Anti-static alarm KBFJD401-Ⅰ/401-Ⅱ, workbench alarm, wrist strap alarm!

Anti-static alarm KBFJD401-Ⅰ/401-Ⅱ, workbench alarm, wrist strap alarm!

Electrostatic wristbands alarm can be used for renl-time and continuous monitoring and control on anti-static wristbands. It can be used for real-tin e monitoring on the whole grounding system, so as to protect normal operation of grounding systc m in anti-static work area for one or two working staft(s). This product ensures 100% monitoring on the E3D status of the operators.
This product is fully in line with the standard ANSIESD S20.20of American Electrostatic Dischange Association and the standard IEC-61340 of the Eropean Electrical Overstress Association. For the electrostatic grounding in the electitatic protection area (EPA), both these standards clearly require that the effective electrostatic grounding should be ensured, and electrostatic wristhands alarm should be used for real-time n onitoring and alarm. The wristbands alarm has changed the traditional situation of single electrostatic grounding, ensures the reliability of grounding to prevent electrostatic damage!
1. Product Features
1.1 This product uses the US’s National Semiconductor original chip, possessing high reliability and stability.
1.2 This product standard is equipped with safety-regulations-complied power supply! And it has passed a number of certifications and can be exported to a !ot of countries in the world!
1.3 Foolproof design, if the anti-static wristband has failure, the power switch should be manually turned off?
1.4 Alarm sensitivity is easy to be adjusted, it is compatible with the vast majority of anti-static wristbands in market!
1.5 It can be used for real-time monitoring on the operator’s wearing and grounding conditions of anti-static wristbands. it will automatically and immediately alarm in case of abnormality.
2. Instructions for use
2.1 First, connect the ground wire of the electrostatic alarm (Icon 1) to a reliable ESD ground wire.
2.2 For safety reasons, please make sure that safety-regulations-complied power supply is used! Default-configured power supply should be used for electrostatic alarm.DCplug can be connected into any power port of the alarm body!
2.3 Wear the qualified anti-static wristband and insert it into INput port of the alarm!
2.4 Tumn the power switch from OFF to ON, then the alarm begins to work, green light means normal! Red light means abnormal!
2.5 If the alarm becomes red and sounds, after confirmation that the anti-static wristband is qualified, it indicates that the user of wristband has a too low body resistance, through the front-side CAL the sensitivity can be adjusted till the green light glows!